Skip to product information
1 of 7

VIVOSUN - AeroWave E6 Gen2 Clip Fan

Regular price
$89.90
Regular price
Sale price
$89.90
Tax included.

A-Grade Rewards Program

What's In the Box?
  • AeroWave E6 Gen2 Fan 
  • Mounting Clip 
  • Type-C extension cable
  • 3 x Cable tie
  • 1 x Wire tie
Warranty

2 years

Pairs Well With
VIVOSUN AeroWave E6 Gen2 6-inch clip fan with green trim, front view, for grow tent ventilation
VIVOSUN AeroWave E6 Gen2 clip fan attached to a tent pole, angled view, for grow tent ventilation
VIVOSUN AeroWave E6 Gen2 natural wind mode graphic — 5 local vs 10 app speed levels, grow tent fan
VIVOSUN AeroWave E6 Gen2 clip fan mounted in a grow tent showing 5-level auto oscillation coverage
VIVOSUN AeroWave E6 Gen2 EC motor safety comparison — flame-retardant chip versus standard chip
VIVOSUN AeroWave E6 Gen2 specifications — 320 CFM, EC motor, 33dB, GrowHub compatible clip fan

Product Details

VIVOSUN AeroWave E6 Gen2 – 6” Clip-On Fan 

The VIVOSUN AeroWave E6 Gen2 is a quiet, powerful 6-inch clip-on grow tent fan powered by an upgraded dual ball bearing EC motor.

Good air circulation is essential in any hydroponic setup. It helps prevent humidity building up between leaves, which can lead to leaf scorching (when light magnifies through water droplets) and powdery mildew. Plants also transpire at a much higher rate under full-spectrum grow lights, so adequate airflow at canopy height and underneath the canopy is essential for a healthy growing environment.

Using the VIVOSUN AeroWave E6 Gen2 will help to strengthen plant stems by mimicking a natural breeze. Clip it onto your tent pole, aim it across your canopy, and let it keep your grow space consistent from root to tip.


💨 Local control straight out of the box

No controller or app required — everything is adjustable using the fan's own buttons.

  • Dual ball bearing EC motor delivers 320 CFM airflow at just 33 dB(A)
  • 5 speed levels, with normal and natural wind modes (5 natural wind levels)
  • 5-level auto oscillation, with 90° horizontal and 80° vertical adjustment
  • 3 built-in local timer/cycle setting for automatic on/off circulation
  • Automatically retracts to prevent motor jamming if it detects an obstacle

🧹 Easy to clean, built to last

  • Front cover lifts off easily, so you can wipe down the fan blades in seconds
  • VIVOSUN's patented clamp grips tight on round poles, square poles, or flat surfaces
  • Thick rubber pad on the clamp stops it slipping or marking your surfaces
  • IP54-rated to handle the heat and humidity of a grow space

🔄 Recommended Coverage

Square Grow Rooms

  • 1-2 x AeroWave E6 Gen2 → grow tents up to 1.2 × 1.2 x 2.2M (3.168m³)
  • 2 x AeroWave E6 Gen2 → grow tents up to 2 x 2 x 2.2M (8)
  • 4-6 x AeroWave E6 Gen2 → grow tents up to 3 x 3 x 2.2M (19.8m³)

Rectangular Grow Rooms

  • 1-2 x AeroWave E6 Gen2 → grow tents up to 1.5 × 0.8 × 2M (2.4 m³)
  • 2 x AeroWave E6 Gen2 → grow tents up to 2.4 × 1.2 × 2.2M (6.336 m³)
  • 2-4 x AeroWave E6 Gen2 → grow tents up to 3 × 1.5 × 2.2M (9.9 m³)

📐 Technical specs

  • Model name: AeroWave E6 GEN2
  • Dimensions: 5.58 x 9.15 x 9.88 in.
  • Diameter: 6"
  • Engine: EC
  • Maximum airflow: 320 CFM
  • Number of auto oscillation: 5
  • Number of speed settings: 5 (local)/ 10 (via app/E25)
  • Number of speed (natural breeze): 5
  • Timer: Yes
  • Horizontal oscillation: 90°
  • Vertical angle adjustment range: 80°
  • Noise level: 33 dBA
  • Input voltage: 100-240V AC 50/60Hz
  • Wattage: 12W
  • Suitable pole size: 16mm-22mm
  • Compatible controller: E42/E42A/E25

📦 What's in the box

  • 1 x AeroWave E6 Gen2 Fan
  • 1 x Mounting Clip
  • 3 x Cable ties
  • 1 x Wire tie 
  • 1 x Power cord
  • 1 x Instruction manual
  • Type-C extension cable (for connecting to GrowHub Controllers)

View the online instruction manual.

FAQ

Q. What is the maximum airflow of the VIVOSUN AeroWave E6 Gen2?

The AeroWave E6 Gen2 delivers up to 320 CFM, powered by an upgraded dual ball bearing EC motor.

Q. How quiet is this clip-on grow tent fan?

It runs at just 33 dB(A), making it one of the quieter clip fan options for a grow tent.

Q. How many speed settings does the AeroWave E6 Gen2 have?

It offers 5 speed levels, plus normal and natural wind modes.

Q. Does the fan oscillate automatically?

Yes, it has 5-level auto oscillation with 90° horizontal and 80° vertical adjustment, and it automatically retracts if it detects an obstacle to prevent motor jamming.

Q. Can I control the VIVOSUN AeroWave E6 Gen2 remotely?

Yes, it is compatible with the VIVOSUN GrowHub E42/E42A/E25 for remote app control and syncs with SGS (Smart Grow System) for connected-device operation.

Q. What pole sizes fit the clamp?

The patented clamp design fits round or square poles from 16mm to 22mm, with a thick rubber pad to prevent slipping and surface damage.

Q. Is the AeroWave E6 Gen2 suitable for humid grow environments?

Yes, it is IP54-rated to withstand high temperatures and humidity, making it suitable for grow tent conditions.

Q. How close can the AeroWave E series fan be placed to grow lights?

The AeroWave E series fan is made of ABS plastic and should not be exposed to temperatures above 140°F (60°C). Avoid placing the fan directly against LED chips or high-temperature housings. For UV or high-intensity lights, maintain a safe distance according to the light’s heat output to prevent deformation. The recommended operating temperature is 32–140°F (0–60°C).

Overall rating: 4.875 / 5 from 16 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Easy to use and versatile

"Easy to use and versatile where it can be clipped in the room. Does a good job and reasonably priced"

MICK R. (5/5)

Best fan yet

"Of the fans I’ve used this is by far the best quality"

Jason G. (5/5)

Solid product

"The tent pole support makes this great to use ."

Brandon H. (4/5)

Great product

"Better than the others"

Christopher B. (5/5)

A clip fan that works!

"Great fan, powerful and oscillations keep canopy from burning. Clip is best yet, secure and I rate it over sea hawks etc. For a small tent 1 is enough."

Justin F. (5/5)

Clip design works great for

"Clip design works great for tent. Powerful for size. Great service and price."

Joshua (5/5)

Oscillating fan

"Nifty little gizmo with plenty of breeze!"

Alex S. (5/5)

seems to work

"seems to work"

Drew R. (4/5)

Sturdy and easy to clip

"Sturdy and easy to clip around! Adjustable speed. Only thing is the power cord could be a little longer"

SMALL D. (5/5)

Eazy breezy beautiful cover FAN!

"What can i say it out preforms growlush fans and kills the thc fan by “the hydro city” love it my tomatoes love the breeze really strong wind force too its amazing a must have in any farmers arsenal"

Matt Q. (5/5)

Q&A

Warranty & Returns

Please choose your products carefully, as A-Grade Hydroponics reserves the right not to accept returns based on either an incorrect choice or a change of mind.

However, we love happy customers so contact us with your query and we will do our best to accommodate you. If you have queries about a product you would like to purchase, please contact us to discuss your concerns before you buy.

A-Grade Hydroponics will honour all manufacturers warranties subject to the terms and conditions of those manufacturers. However warranty does not cover abuse, neglect, improper care, loss or damage from incorrect usage.

Warranty claims will be processed at A-Grade Hydroponics' discretion as a refund, repair or replacement. If products need to be returned to us for warranty purposes e-mail us at grow@agradehydroponics.com with the receipt/invoice number, date of purchase and a brief description of the fault (including photographs where possible). We will then issue you with a product return number.

All returns should be in original packaging and have the receipt/invoice number, date of purchase, and product return number enclosed. The product return number should also be written on the outside of the package for easy identification purposes.

A-Grade Hydroponics has a strict 'no returns' or refunds policy for liquid products, like nutrients, additives, gels, calibration fluids etc, so please choose these items carefully.

Shipping & Delivery

*All orders are dispatched in unmarked boxes to maintain your privacy.*

DISPATCH AND DELIVERY

Orders are shipped via Australia Post or shipping platform Big Post. Orders are generally dispatched on Tuesday, Wednesday and Friday. Please allow for additional delivery time for remote areas. If you require express delivery, please contact our sales representatives at 03 9555 6667 or email grow@agradehydroponics.com to obtain a quote. 

Couriers will attempt delivery to the specified address. If no one is home to receive the delivery, the couriers will leave your parcel somewhere safe. If there is no safe place, re-delivery or collection will be offered by the carrier.

Due to the increasing frequency of online fraud and theft, we are unable to ship to P.O. Boxes and Parcel Lockers.

SHIPPING COSTS

All freight charges are calculated on weight, dimensions and location. We are committed to keeping shipping charges at a minimum and do not charge handling fees.

Please note: Freight costs are subject to change. Regional areas, large and bulky orders, and tail-lift delivery occasionally incur an additional levy. Should shipping costs need to be amended it will be to reflect the actual charges, and not incur additional ‘shipping and handling’ fees. We will notify you if this rare situation occurs.

A-Grade Hydroponics reserves the right to cancel the order if shipping costs become prohibitive and customers will be issued a full refund.

PAYMENT

All payments must be cleared before dispatch. Payments can be made online via PayPal, AfterPay, PayID or Electronic Funds Transfer. Payments can also be accepted via credit card by phoning 03 9555 6667.

Please allow at least 24 hours for payments to clear.

FULFILMENT OF ORDERS

You will be notified immediately if an item is permanently unavailable, with options for a replacement item at equal or higher value, refund or store credit.

All refunds will clear within 3-5 business days. Store Credits will be issued as an electronic Gift Card to be used online or in-store.

DANGEROUS AND PROHIBITED GOODS

These goods are available for in-store collection only.