Vapour pressure deficit (VPD), simplified, is a single number that combines your grow room's temperature and humidity to show how strongly the air pulls moisture from your plants' leaves. That pull drives transpiration, and transpiration drives how much water and nutrient your plants take up, so VPD is one of the most useful numbers an indoor grower can watch.
This guide covers what VPD is in plain terms, why it matters in hydroponics, what happens when it's too low or too high, how to measure it, how to correct it and common VPD problems.
š§ What is vapour pressure deficit?
VPD is the difference between how much moisture the air holds and the most it could hold at that temperature before it's saturated. Think of it as the drying power of the air.
- Low VPD: the air is nearly full of moisture, so plants transpire slowly
- High VPD: the air is dry and thirsty, so plants transpire quickly
Because warm air can hold more moisture than cool air, the same humidity reading gives a different VPD at different temperatures. That's why VPD is a better guide than humidity alone.
š± Why VPD matters in hydroponics
Transpiration moves water and dissolved nutrients from the roots up through the plant. When VPD is in the right range, plants feed steadily and grow strongly. When it drifts too low or too high, plants under- or over-transpire, which leads to nutrient imbalances, stress and slower growth. Knowing your VPD lets you spot and fix these problems before they show up on the leaves.
š§ļø What happens when VPD is too low?
Low VPD usually means humidity is too high for the room temperature. Plants transpire less, drink less and take up fewer nutrients. As a result:
- The growing medium stays wet for longer
- Nutrients build up around the roots
- Less oxygen reaches the roots
- Growth slows
- The risk of mould and root disease rises
āļø What happens when VPD is too high?
High VPD happens when humidity is too low or the room is too hot. Plants transpire hard and pull water faster than nutrients, so:
- The growing medium dries out quickly
- Nutrients concentrate in the root zone and EC rises
- pH becomes less stable
- Plants are more prone to nutrient burn and stress
For example, a solution fed at EC 1.0 and pH 6.0 can become much stronger in the root zone after a long, hot, dry spell, leading to nutrient burn and salt build-up.
š How to measure VPD
The simplest way is to read your temperature and humidity at canopy height with a digital hygrometer, then look them up on a VPD chart. Many environmental controllers and grow room monitors calculate VPD for you. For the formula and stage-by-stage targets, see understanding VPD.
As a general rule:
- Seedlings and clones prefer a low VPD
- Vegetative plants prefer a moderate VPD
- Flowering plants do best with a slightly higher VPD
š” A-Grade Tip: Take your reading in the middle of the canopy, not next to a fan or the exhaust. Plants feel the conditions around their leaves, not at the edge of the room.
āļø How to correct high or low VPD
To lower VPD (air too dry or hot)
- Raise humidity with a humidifier
- Lower the room temperature
To raise VPD (air too humid)
- Lower humidity with a dehumidifier or more extraction
- Raise the temperature slightly
Good airflow from circulating fans helps either way by preventing pockets of still, humid air around the leaves.
ā ļø Common VPD problems and fixes
| Problem | Likely cause | Status | Fix |
|---|---|---|---|
| Wet media and slow growth | VPD too low | Common | Lower humidity or raise temperature slightly |
| Mould or mildew | VPD too low for long periods | Common | Increase extraction and airflow |
| Burnt leaf tips and rising EC | VPD too high | Common | Raise humidity, lower temperature and dilute the feed |
| Clones wilting | VPD too high for cuttings | Common | Use a humidity dome to lower VPD |
š VPD simplified: key takeaways
VPD tells you how hard the air is pulling water from your plants. Too low and plants under-feed and risk mould; too high and they over-feed and risk nutrient burn. Measure temperature and humidity at canopy height, check a VPD chart and adjust humidity, temperature and airflow to stay in range.
Browse our temperature and humidity control range to start tracking VPD in your grow room.

